|
Inground Accessories |
|
|
|
|
|
|
|
|
Catalog No. |
Description |
Catalog No. |
Description |
|
|
DB5PA |
Paver Adapter |
DB5RGC |
Rockguard Composite |
|
|
DB5CMF |
Concrete Mounting Frame |
DB5RGA |
Rockguard Aluminum |
|
|
DB5LFM |
Lens Frame with no accessory |
DB5RGB |
Rockguard Bronze |
|
|
DB5LFA |
Lens Frame with accessory |
DB5DSA |
Directional Shield Aluminum |
|
|
DB5IDL |
Internal Directional Louver |
DB5DSB |
Directional Shield Bronze |
|
|
DB5HCL |
Internal Honeycomb Louver |
DB5LMG |
Lamping Module Gasket |
|
|
DB5LA |
LOC-AIM |
DB5JBCS |
Junction Box Cover Matte Stainless Steel |
|
|
DB5SL |
Standard Large Lens |
DB5JBCB |
Junction Box Cover Matte Brass |
|
|
DB5CL |
Convex Large Lens |
DB5ICL |
Inside Lens Clear |
|
|
DB5DO |
Drive-Over Lens |
DB5ISL |
Inside Lens Spread |
|
|
DB5SRL |
Slip-Resistant Large Lens |
DB5CPS* |
Concrete Pour Kit, Matte Stainless Steel |
|
|
DB5SR |
Lens Frame, Matte Stainless Steel |
DB5ISS |
Internal Source Shield |
|
|
 |
|
DB5WIF |
Wiring, Incandescent/Fluorescent |
|
|
|
|
|
|
|
|
Catalog No. |
Description |
Catalog No. |
Description |
|
|
G8GB |
Rockguard Bronze |
G8RS |
Trim Ring Cast Matte Stainless Steel |
|
|
CP8 |
Concrete Pour Kit, PVC |
G8DS |
Directional Shield, Rotatable 360° |
|
|
CPS8 |
Concrete Pour Kit, Matte Stainless Steel |
G8ISL |
Multi-Directional Spread Lens |
|
|
IHL17 |
Snap-on Honeycomb Louver for E17 Lamps |
G8ICL |
Internal Clear (Double) Lens |
|
|
IHL38 |
Snap-on Honeycomb Louver for Par38 Lamps |
G8IDL |
Internal Directional Louver, Laser-Cut |
|
|
G8RB |
Trim Ring Cast Bronze |
G8SL |
Standard Lens |
|
|
G8G |
Rock Guard Composite |
G8SRL |
Slip Resistant Lens |
|
|
LED Accessories |
|
|
|
|
|
|
|
|
Catalog No. |
Description |
Catalog No. |
Description |
|
|
PC4JB1 |
Re-enterable encapsulant for sealing junction boxes, 10.5 cubic inches. For use with the JB1. |
JB1 |
Junction Box-2 lights, 10.5 cubic inches. (1) 1/2” or 3/4” N.P.T. bottom. (2) 1/2” or 3/4”, one each side. |
|
|
PC4JB2/SJB10 |
Re-enterable encapsulant for sealing junction boxes, 21.3 cubic inches. For use with the JB2. |
JB2 |
Junction Box-4 lights, 21.3 cubic inches. (2) 1/2”, 3/4” or 1” N.P.T. bottom. (4) 1/2” or 3/4”, one each side. |
|
|
PC4JB4 |
Re-enterable encapsulant for sealing junction boxes, 40 cubic inches. For use with the JB4. |
JB4 |
Junction Box-8 lights, 40 cubic inches. (2) 1/2”, 3/4”, 1 or 1-1/4”, N.P.T. bottom. (8) 1/2” or 3/4”, two each side. |
|
|
PC4JB6 |
Re-enterable encapsulant for sealing junction boxes, 125.7 cubic inches. For use with the JB6. |
JB6 |
Junction Box-12 lights, 125.7 cubic inches. (2) 1/2”, 3/4”, 1, 1-1/4”, 1-1/2” or 2”, N.P.T. bottom. (20) 1/2”, five each side or (16) 3/4”, four each side. |
|
|
CC50 |
Male connector, Machined Naval Brass Cord Seal-Neoprene packing seal, brass friction ring. 1/2” N.P.T. for use with 16-3 STO-WA entry into junction box. |
LVTS3-15 |
Stepdown transformer for use with submersible low voltage fixtures, Primary: 120VAC, 60 Hz., Secondary: 11/12/13 VAC., Load: 300VA. |
|
|
EC34 |
Stainless steel waterproofing penetration fitting. 3/4” N.P.T. x 8” long for use with supply conduit into junction box. |
LVTS6-15 |
Stepdown transformer for use with submersible low voltage fixtures, Primary: 120VAC, 60 Hz., Secondary: 11/12/13 VAC., Load: 600VA. |
|
|
EC1 |
Stainless steel waterproofing penetration fitting. 1” N.P.T. x 8” long for use with supply conduit
into junction box. |
LVTS9-15 |
Stepdown transformer for use with submersible low voltage fixtures, Primary: 120VAC, 60 Hz., Secondary: 11/12/13 VAC., Load: 900VA. |
|
|
Underwater/Fountain |
|
|
|
|
|
|
|
Catalog No. |
Description |
Catalog No. |
Description |
|
|
PC4JB1 |
Re-enterable encapsulant for sealing junction boxes, 10.5 cubic inches. For use with the JB1. |
JB1 |
Junction Box-2 lights, 10.5 cubic inches. (1) 1/2” or 3/4” N.P.T. bottom. (2) 1/2” or 3/4”, one each side. |
|
|
PC4JB2/SJB10 |
Re-enterable encapsulant for sealing junction boxes, 21.3 cubic inches. For use with the JB2. |
JB2 |
Junction Box-4 lights, 21.3 cubic inches. (2) 1/2”, 3/4” or 1” N.P.T. bottom. (4) 1/2” or 3/4”, one each side. |
|
|
PC4JB4 |
Re-enterable encapsulant for sealing junction boxes, 40 cubic inches. For use with the JB4. |
JB4 |
Junction Box-8 lights, 40 cubic inches. (2) 1/2”, 3/4”, 1 or 1-1/4”, N.P.T. bottom. (8) 1/2” or 3/4”, two each side. |
|
|
PC4JB6 |
Re-enterable encapsulant for sealing junction boxes, 125.7 cubic inches. For use with the JB6. |
JB6 |
Junction Box-12 lights, 125.7 cubic inches. (2) 1/2”, 3/4”, 1, 1-1/4”, 1-1/2” or 2”, N.P.T. bottom. (20) 1/2”, five each side or (16) 3/4”, four each side. |
|
|
CC50 |
Male connector, Machined Naval Brass Cord Seal-Neoprene packing seal, brass friction ring. 1/2” N.P.T. for use with 16-3 STO-WA entry into junction box. |
LVTS3-15 |
Stepdown transformer for use with submersible low voltage fixtures, Primary: 120VAC, 60 Hz., Secondary: 11/12/13 VAC., Load: 300VA. |
|
|
CC75 |
Male connector, Machined Naval Brass Cord Seal-Neoprenepacking seal, brass friction ring. 3/4” N.P.T. for use with 10-3 STO-WA entry into junction box. |
LVTS6-15 |
Stepdown transformer for use with submersible low voltage fixtures, Primary: 120VAC, 60 Hz., Secondary: 11/12/13 VAC., Load: 600VA. |
|
|
EC34 |
Stainless steel waterproofing penetration fitting. 3/4” N.P.T. x 8” long for use with supply conduit into junction box. |
LVTS9-15 |
Stepdown transformer for use with submersible low voltage fixtures, Primary: 120VAC, 60 Hz., Secondary: 11/12/13 VAC., Load: 900VA. |
|
|
EC1 |
Stainless steel waterproofing penetration fitting. 1” N.P.T. x 8” long for use with supply conduit
into junction box. |
|
|
|
|
|
|
|
|
|
Catalog No. |
Description |
Catalog No. |
Description |
|
|
CC50 |
Male connector, Machined Naval Brass Cord Seal-Neoprene packing seal, brass friction ring. 1/2” N.P.T. for use with 16-3 STO-WA entry into junction box. |
SJB10 |
2 lights, 21 cubic inches. (1) 1/2” or 3/4” N.P.T. bottom. (2) 1/2” or 3/4”, one each end. |
|
|
CC50F |
Female connector, Strain Relief, Machined Naval Brass Cord Seal Neoprene packing seal, brass friction ring. 1/2” N.P.T. x 16-3 cord.. |
SJB30 |
8 lights, 70 cubic inches. (6) 1/2” or 3/4” N.P.T, three each side North and South. (2) 1/2”, 3/4” or 1” N.P.T., one each side East and West. (3) 1/2”, 3/4” or 1” N.P.T. bottom. |
|
|
CC75 |
Male connector, Machined Naval Brass Cord Seal-Neoprenepacking seal, brass friction ring. 3/4” N.P.T. for use with 10-3 STO-WA entry into junction box. |
LVTS3-15 |
Stepdown transformer for use with submersible low voltage fixtures, Primary: 120VAC, 60 Hz., Secondary: 11/12/13 VAC., Load: 300VA. |
|
|
CC75F |
Female connector, Strain Relief, Machined Naval Brass Cord Seal Neoprene packing seal, brass friction ring. 3/4” N.P.T. x 10-3 cord. |
LVTS6-15 |
Stepdown transformer for use with submersible low voltage fixtures, Primary: 120VAC, 60 Hz., Secondary: 11/12/13 VAC., Load: 600VA. |
|
|
EC34 |
Stainless steel waterproofing penetration fitting. 3/4” N.P.T. x 8” long for use with supply conduit into junction box. |
LVTS9-15 |
Stepdown transformer for use with submersible low voltage fixtures, Primary: 120VAC, 60 Hz., Secondary: 11/12/13 VAC., Load: 900VA. |
|
|
EC1 |
Stainless steel waterproofing penetration fitting. 1” N.P.T. x 8” long for use with supply conduit
into junction box. |
PC4SJB30 |
Re-enterable encapsulant for sealing junction boxes, 75.2 cubic inches. For use with the SJB30. |
|
|
PC4JB2/SJB10 |
Re-enterable encapsulant for sealing junction boxes, 21.3 cubic inches. For use with the SJB10. |
|
|
|
|
|
|
|
|
|
Catalog No. |
Description |
Catalog No. |
Description |
|
|
PC4JB1 |
Re-enterable encapsulant for sealing junction boxes, 10.5 cubic inches. For use with the JB1. |
JB1 |
Junction Box-2 lights, 10.5 cubic inches. (1) 1/2” or 3/4” N.P.T. bottom. (2) 1/2” or 3/4”, one each side. |
|
|
PC4JB2/SJB10 |
Re-enterable encapsulant for sealing junction boxes, 21.3 cubic inches. For use with the JB2. |
JB2 |
Junction Box-4 lights, 21.3 cubic inches. (2) 1/2”, 3/4” or 1” N.P.T. bottom. (4) 1/2” or 3/4”, one each side. |
|
|
PC4JB4 |
Re-enterable encapsulant for sealing junction boxes, 40 cubic inches. For use with the JB4. |
JB4 |
Junction Box-8 lights, 40 cubic inches. (2) 1/2”, 3/4”, 1 or 1-1/4”, N.P.T. bottom. (8) 1/2” or 3/4”, two each side. |
|
|
|
|
JB6 |
Junction Box-12 lights, 125.7 cubic inches. (2) 1/2”, 3/4”, 1, 1-1/4”, 1-1/2” or 2”, N.P.T. bottom. (20) 1/2”, five each side or (16) 3/4”, four each side. |
|
|
Electrical Accessories |
|
|
Low Voltage Transformers
|
|
|
|
|
Catalog No. |
Description |
Catalog No. |
Description |
|
|
LVT150 |
150VA Powder Coated |
LVT150PC |
150VA w/Photo Cell Powder Coated |
|
|
LVT3-15 |
300VA Powder coated |
LVTS3-15 |
300VA Stainless Steel |
|
|
LVT6-15 |
600VA (300W x2) Powder Coated |
LVTS6-15 |
600VA (300W x2) Stainless Steel |
|
|
LVT9-15 |
900VA (300W x3) Powder Coated |
LVTS9-15 |
900VA (300W x3) Stainless Steel |
|
|
BTBC303-15 |
Composite Inground Box 300VA/300W; 12, 13, 14, and 15-volt output taps; 2.7 AMP line voltage draw. |
BTBC603-15 |
Composite Inground Box 600VA/300W x2; 12, 13, 14, and 15-volt output taps; 5.5 AMP line voltage draw. |
|
|
Transformer Accessories & Wire
|
|
|
|
|
Catalog No. |
Description |
Catalog No. |
Description |
|
|
BT5 |
Plug-in analog transformer time clock |
BT6 |
Plug-in digital transformer time clock with lithium battery backup |
|
|
BPC1 |
Photo cell. Finger type, adjustable photo control. 1/2” N.P.T. for mounting |
BPC3 |
Plug-in photo cell, 3” lead for direct mount to transformer housing |
|
|
BPC15 |
Plug-in photo cell, 15 ft. lead for direct mount to transformer housing |
BSCW100-12 |
LV Cable-100 feet (12 gauge) |
|
|
BSCW500-10 |
LV Cable-500 feet (10 gauge) |
BSCW500-12 |
LV Cable-500 feet (12 gauge) |
|
|
Mounting Accessories
|
|
|
|
|
Catalog No. |
Description |
Catalog No. |
Description |
|
|
TA21 |
Extruded aluminum twin mount arm for down lighting. 24” (610mm) wide. Two 1/2” (13mm) N.P.S. fixture mounts. |
TA22 |
Extruded aluminum twin mount arm for up lighting. 24” (610mm) wide. Two 1/2” (13mm) N.P.S. fixture mounts. |
|
|
BST18 |
Extruded aluminum stanchion mount with twin mount arm for up lighting included. 3” O.D. (76mm) x 18” (457mm) high with two 1/2” (13mm) N.P.S. fixture mounts. |
BSS18 |
Extruded aluminum single stanchion mount. 3” O.D. (76mm) x 18” (457mm) high with 1/2” (13mm) N.P.S. fixture mount. |
|
|
BPT21 |
Cast aluminum single post top mount. 1/2” (13mm) N.P.S. fixture mount. |
BPT22 |
Cast aluminum twin post top mount. Two 1/2” (13mm) N.P.S. fixture mounts. |
|
|
BMW34 |
Wall or ceiling canopy mount. |
BMPA-4 |
Cast aluminum post top adapter. Slips over 3” O.D. (76mm) post top with 1/2” N.P.S. (13mm) center hole. |
|
|
BMW331 |
Die-cast aluminum, cylindrical junction box. 120V button-eye photo control. 1/2” N.P.S. (13mm) on top and two 1/2” N.P.T. (13mm) bottom inlets. |
BTM3 |
Cast aluminum tree mount junction box. 4” (102mm) x
2-1/4” (57mm) with 1/2” N.P.S. (13mm) top inlet and four 1/2” N.P.S. (13mm) side inlets. |
|
