My Account | Register

Accessories

General accessories shown below - for specific accessories, go to the model's specification sheet.

« Previous Page

1 2 3 4 5

(For use with Accent and Area/Walkway)
(Used with aluminum or composite fixtures)

Hot dipped galvanized cast iron junction box. 4" square x 3" high with 1/2" NPS top inlet.
BBI1 - Two 1/2" NPT bottom inlets
BBI2 - Two 3/4" NPT bottom inlets

BBI3/BBI4

(For use with Accent and Area/Walkway)
(Used with aluminum or composite fixtures)

Hot dipped galvanized cast iron junction box. 4" square x 3" high with 1/2" NPS top inlet.
BBI3 - Four 1/2" NPT side inlets and two 1/2" NPS bottom inlets.
BBI4 - Two 1/2" NPT side inlets and two 1/2" NPS bottom inlets.

RWC HID

Shown with TL7000 Bullyte (not included)

(For use with TL6070MH, TLC6070MH, FL7070MH, FL9070H, FL9100H and FL9100M)

Specification sheet available

RWC

Shown with TL7000 Bullyte (not included)

(For use as a mounting canopy with TL5, TLC5, TL6, TLC6, TL7, TLC7, TL11, TL12 ,TLF13, TLF14, FL7 short and FL9)

Specification sheet available

BS1

(For use with Accent and Area/Walkway)

BS1 - Extruded aluminum stake, 10" long with 1/2" NPT, stainless locking screws, Black powder coat finish. Boxed 12 per carton

BS6

(For use with Accent and Area/Walkway)

BS6 - Telescopic low voltage stake. Constructed of non-corrosive PVC. Field adjustable 2"-14" above ground. Ideal for use in fast growing annual beds. Boxed 12 per carton. (U.S. Patent No. 7,741,133)

BS7

(For use with Accent and Area/Walkway)

BS7 - Two-piece low voltage mounting stake. PVC stake 1-3/8"OD x 12" long with threaded 1/2" NPS removable

BS8/BS8N

(For use with Accent and Area/Walkway)

BS8/BS8N - Low voltage mounting stake. Two piece low voltage mounting stake. PVC stake 1-3/8" OD x 15" long with threaded 1/2" NPS removable fitter (cast brass on S8N). Boxed 12 per carton.